Refer to chapter "Care andCleaning".4.2 Setting and changing thetimeAfter the first connection to the mains,all symbols in the display are on forsome seconds. For the subsequent fewseconds the display shows the softwareversion.After the software version goes off, thedisplay shows h and 12:00.Setting the time of day:1. Touch or to set the hours.2. Touch or .3. Touch or to set the minutes.4. Touch or .The Temperature / Time display showsthe new time.Changing the time of dayYou can change the time of day onlywhen the appliance is off. Touch .flashes in the display. To set the newtime of day, use the above procedure.5. CONTROL PANEL5.1 Electronic programmer1 2 3 4 5 6 7 8 9 10Use the sensor fields to operate the ap-pliance.SensorFieldFunction Description1 - DISPLAY Shows the current settings of the appli-ance.2 ON / OFF To activate and deactivate the appli-ance.3 OPTIONS To set an oven function, an automaticprogramme or a cleaning function (se-lected models only). Straight access toan oven function when the appliance isoff.4 MY FAVOURITEPROGRAMMETo store your favourite programme.Use it to have access to your favouriteprogramme directly or when the appli-ance is deactivated.8 www.aeg.com