AEG BS9304001 User Manual

Also see for ProCombi BS9304001: User manual User manual User manual User manual User manual

Symbol Function DescriptionEnd Time To set the switch-off time for an heating function (max. 23 h59 min).You can use Duration and End Time at the same time, if you want to automatically activateand deactivate the appliance on a given time later.If you set the time for a clock function, the time starts to count down after 5 seconds.If you use the clock functions Duration and End Time, the appliance deactivates the heatingelements after 90% of the set time. The appliance uses the residual heat to continue thecooking process until the time ends (3-20 minutes).Setting the Duration and End Time1. Set the heating function.2. Press repeatedly until the display shows the necessary clock function and the rela-ted symbol.3. Use the shuttle to set the necessary time. Press OK to confirm.After 90% of the set time, an acoustic signal sounds. The appliance deactivates. Thedisplay shows a message.4. Press a sensor field or open the door to stop the signal.With Duration and End Time the appliance deactivates automatically.With Duration and End Time you must set the heating function and the temperature first.Then you can set the clock function.When you use the Core Temperature Sensor, Duration and End Time do not work.Heat + HoldYou can activate or deactivate the function in the Basic Settings menu.The Heat + Hold function keeps prepared food warm at 80°C for 30 minutes. It activatesafter the baking or roasting procedure ends.Conditions for the function:• The set temperature is more than 80°C.• The function Duration is set.Activating the function1. Activate the appliance.2. Select the heating function.3. Set the temperature above 80°C.4. Press again and again until the display shows Heat + Hold . Press OK to confirm.When the function ends, an acoustic signal sounds.16 Clock functions