Removing and cleaning the door glass panels1. Remove the door.2. Hold the door trim (B) on the top edgeof the door at the two sides and pushinwards to release the clip seal.3. Pull the door trim to the front to re-move it.4. Hold the door glass panels on their topedge one by one and pull them up outof the guide5. Clean the door glass panels.To install panels follow the procedure in re-verse. Install the smaller panel first, then thelarger.Oven lampWARNING!There is a risk of electrical shock.The oven lamp and the lamp glass cover can be hot.Before you change the oven lamp:• Deactivate the appliance.• Remove the fuses from the fuse box or deactivate the circuit breaker.CAUTION!Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lampglass cover and the cavity.Replacing the top lamp:1. Turn the lamp glass cover counterclockwise to remove it.2. Remove the metal ring and clean the glass cover.3. Replace the lamp with a suitable 300 °C heat-resistant lamp.Use the same lamp type.4. Attach the metal ring to the glass cover.5. Install the glass cover.Replacing the side lamp:1. Remove the left shelf support.BCare and cleaning 25