Step 5 Hold the door trim (B) on the top edgeof the door at the two sides and pushinwards to release the clip seal.12BStep 6 Pull the door trim to the front to re‐move it.Step 7 Hold the door glass panels by theirtop edge and carefully pull them outone by one. Start from the top panel.Make sure the glass slides out of thesupports completely.Step 8 Clean the glass panels with water and soap. Dry the glass panels carefully. Do notclean the glass panels in the dishwasher.Step 9 After cleaning, install the glass panels and the oven door.If the door is installed correctly, you will hear a click when closing the latches.Make sure that you put the glass panels (Aand B) back in the correct sequence. Checkfor the symbol / printing on the side of theglass panel, each of the glass panels looksdifferent to make the disassembly and as‐sembly easier.When installed correctly the door trim clicks.Make sure that you install the middle panel ofglass in the seats correctly.A BAB32/40CARE AND CLEANING