• Always use oven gloves to remove or insert accessories orovenware.• To remove the shelf supports first pull the front of the shelfsupport and then the rear end away from the side walls.Install the shelf supports in the opposite sequence.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metal scrapersto clean the glass door since they can scratch the surface,which may result in shattering of the glass.• Before pyrolytic cleaning, remove all accessories andexcessive deposits/spills from the appliance cavity.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person must install this appliance.• Remove all the packaging.• Do not install or use a damaged appliance.• Follow the installation instructions supplied with the appliance.• Always take care when moving the appliance as it is heavy. Always use safety gloves andenclosed footwear.• Do not pull the appliance by the handle.• Install the appliance in a safe and suitable place that meets installation requirements.• Keep the minimum distance from other appliances and units.• Before mounting the appliance, check if the appliance door opens without restraint.• The appliance is equipped with an electric cooling system. It must be operated with theelectric power supply.Cabinet minimum height (Cabinet under the work‐top minimum height)590 (600) mmCabinet width 560 mmCabinet depth 550 (550) mmHeight of the front of the appliance 594 mmHeight of the back of the appliance 576 mmWidth of the front of the appliance 595 mm5/40SAFETY INSTRUCTIONS