AEG EPB355020M User Manual

Also see for EPB355020M: User manual User manual

• Always use oven gloves to remove or put inaccessories or ovenware.• Before carrying out any maintenance, disconnect theappliance from the power supply.• Ensure that the appliance is switched off beforereplacing the lamp to avoid the possibility of electricshock.• Do not use a steam cleaner to clean the appliance.• Do not use harsh abrasive cleaners or sharp metalscrapers to clean the glass door since they can scratchthe surface, which may result in shattering of the glass.• If the mains power supply cable is damaged, it mustbe replaced by the manufacturer, its AuthorisedService Centre or similarly qualified persons to avoidan electrical hazard.• Excessive spillage must be removed before thepyrolytic cleaning. Remove all parts from the oven.• To remove the shelf supports first pull the front of theshelf support and then the rear end away from theside walls. Install the shelf supports in the oppositesequence.• The means for disconnection must be incorporated inthe fixed wiring in accordance with the wiring rules.2. SAFETY INSTRUCTIONS2.1 InstallationWARNING!Only a qualified person mustinstall this appliance.• Remove all the packaging.• Do not install or use a damagedappliance.• Follow the installation instructionssupplied with the appliance.• Always take care when moving theappliance as it is heavy. Always usesafety gloves and enclosed footwear.• Do not pull the appliance by thehandle.• The kitchen cabinet and the recessmust have suitable dimensions.• Keep the minimum distance fromother appliances and units.• Install the appliance in a safe andsuitable place that meets installationrequirements.• Parts of the appliance carry current.Close the appliance with furniture toprevent touching the dangerousparts.• The appliance is equipped with anelectric cooling system. It must beoperated with the electric powersupply.www.aeg.com4