50InstallationUnpackingAll transit bolts and packing must be removed before using the appliance.Using the suppliedspanner, unscrewand remove the 2rear bottom screws.Slide out the 2 plas-tic pins. Lay themachine on its back,taking care not tosquash the hoses.This can be avoidedby placing one of the corner packing piecesbetween the machine and the floor.Remove the polystyrene block from thebottom of the machine and release thetwo plastic bags.Carefully slide out the left-hand bagremoving it towards the right and thendownwards.Slide out the right-hand bag removing it towards the left and thenupwards.The bottom coverplate, which canbe found insidethe machine withthe instructionbook, will nowneed to be fitted.Hook the bottomof the plate 'A',into position first. Then push the other end of the plate into position.Important!You can find more detailed instructions regarding the bottom cover assembligin its relative bag.
