11Filling with Rinse AidRinse aid ensures that your dishes gleam and arefree from spots, and that you glasses are clear.1 Use only branded rinse aid for dishwashers.Never fill the rinse aid container with anyanother substance (e.g. concentrated vine-gar). This would damage the appliance.Fill with rinse aid:• Prior to using the dishwasher for the first time.• When a dark point surrounded by a light ring is tobe seen in the indicator window on the container.If there is sufficient rinse aid in the container, theindicator window is uniformly dark.The rinse aid compartment is on the inside of thedishwasher door.1. Open the door.2. Press the rinse aid compartment release buttonwith your finger.3. Fully open the rinse aid compartment lid.4. Fill with rinse aid exactly up to the level marked“max”; this corresponds to a quantity of approx.140 ml.5. Close the lid and press until it locks into place.6. Wipe up any spilt rinse aid with a cloth. Otherwisetoo much foam will be formed during the wash.Adjusting Rinse Aid Dosing3 As the dishes are washed rinse aid isreleased from the dispenser into the washwater. The dose is factory set at 4, and canbe adjusted from 1 to 6. Only change the set-ting if streaks, milky spots or dried on watermarks are visible on glasses or crockery.1. Open the door of the dishwasher.2. Press the rinse aid compartment release buttonwith your finger.3. Fully open the rinse aid compartment lid.4. Set the dose level.5. Close the lid and press until it locks into place.6. If rinse aid has run out, wipe up with a cloth.