AEG Electrolux FAVORIT 89020 VI User Manual

AEG Electrolux FAVORIT 89020 VI User Manual Manual pdf 28 page image

Remove all packaging before positioning the machine.If possible, position the machine next to a water tap and a drain.This dishwasher is designed to be fitted under a kitchen counter or work surface.Attention! Carefully follow the instructions on the enclosed template for building in thedishwasher and fitting the furniture panel.No further openings for the venting of the dishwasher are required, but only to let thewater fill and drain hose and power supply cable pass through.The dishwasher incorporates adjustable feet to allow the adjustment of the height.During all operations that involve accessibility to internal components the dishwasher hasto be unplugged.When inserting the machine, ensure that the water inlet hose, the drain hose and the supplycable are not kinked or squashed.Fixing to the adjacent unitsThe dishwasher must be secured against tilting.Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure(adjacent kitchen unites, cabinets, wall).LevellingGood levelling is essential for correct closure and sealing of the door. When the applianceis correctly levelled, the door will not catch on either side of the cabinet. If the door doesnot close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.Water connectionWater supply connectionsThis appliance can be connected to either a hot (max. 60°) or cold water supply.With a hot water supply you can have a significant reduction of energy consumption. Thishowever, depends on how the hot water is produced. (We suggest alternative sources ofenergy that are more environmentally friendly as e.g. solar or photovoltaic panels andaeolian).For making the connection itself, the coupling nut fitted to the machine's supply hose isdesigned to screw onto a 3/4" thread spout or to a purpose made quick-coupling tap suchas the Press-block.The water pressure must be within the limits given in the "Technical specifications". Yourlocal Water Authority will advise you on the average mains pressure in your area.The water inlet hose must not be kinked, crushed, or entangled when it is being connected.The dishwasher features fill and drain hoses which can be turned either to the left or theright to suit the installation by means of the locknut.The locknut must be correctly fitted to avoid water leaks.(Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut.In this case, this kind of facility is not possible). If the machine is connected to new pipesor pipes which have not been used for a long time, you should run the water for a fewminutes before connecting the inlet hose.DO NOT use connection hoses which have previously been used for an old appliance.28 Water connection