2. In the display appears the default language message. If you want to confirm the defaultlanguage press OK / START .3. If you want to set a different language use the up and down scrolling buttons untilthe required language appears in the display. Press OK / START to confirm.First useBefore using your dishwasher for the first time:• Ensure that the electrical and water connections comply with the installation instruc-tions• Remove all packaging from inside the appliance• Set the water softener• Pour 1 litre of water inside the salt container and then fill with dishwasher salt• Fill the rinse aid dispenserIf you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc... set theMultitab function (see "Multitab function").Setting the water softenerThe dishwasher is equipped with a water softener designed to remove minerals and saltsfrom the water supply, which would have a detrimental or adverse effect on the operationof the appliance.The higher the content of these minerals and salts, the harder your water is. Water hardnessis measured in equivalent scales, Clarke degrees, French degrees (°TH) and mmol/l (millimolper litre - international unit for the hardness of water).The softener should be adjusted according to the hardness of the water in your area. Yourlocal Water Authority can advise you on the hardness of the water in your area.Water hardness Adjusting the water hardnesssettingUse of saltClarke °TH mmol/l manually electronically64 - 88 91 - 125 9,1 - 12,5 2 level 10 yes53 - 63 76 - 90 7,6 - 8,9 2 level 9 yes46 - 52 65 - 75 6,51 - 7,5 2 level 8 yes36 - 45 51 - 64 5,1 - 6,4 2 level 7 yes28 - 35 40 - 50 4,0 - 5,0 2 level 6 yes23 - 27 33 - 39 3,3 - 3,9 2 level 5 yes18 - 22 26 - 32 2,61 - 3,2 1 level 4 yes13 - 17 19 - 25 1,9 - 2,5 1 level 3 yes5 - 12 7 - 18 0,71 - 1,8 1 level 2 yes< 5 < 7 < 0,7 1 level 1 no8 First use