AEG Electrolux LAVAMAT 72640 User Manual

Also see for LAVAMAT 72640: User manual

AEG Electrolux LAVAMAT 72640 User Manual Manual pdf 16 page image

Alarm codesIn the event of operating problems, somealarm codes can be displayed, for exampleE20 (see paragraph «Something notworking»).End of programmeWhen the programme has finished aflashing zero is displayed, the «Door» pilotlight and the Start/Pause light go out andthe door can be opened.Select the «Start/Pause»To start the selected programme, press theStart/Pause button; the corresponding redpilot light stops flashing.The washing pilot light is on to indicatethat the appliance starts operating.The door pilot light is on to indicate thedoor is locked.To interrupt a programme which is running, depress the Start/Pause button: thecorresponding red pilot light starts to flash.To restart the programme from the point at which it was interrupted, press theStart/Pause button again.If you have chosen a delayed start, the machine will begin the countdown.If an incorrect option is selected, the integrated yellow pilot light of theStart/Pause button flashes for 3 times the message Err is displayed for about 2seconds.Select the Delay StartBefore you start the programme, if youwish to delay the start, press the Delay Startbutton repeatedly, to select the desired delay.The selected delay time value (up to 20hours) will appear on the display for about3 seconds, then the duration of theprogramme will appear again.16 Use ' %# &