At the end of the programmeThe machine stops automatically, the Start/Pause light goes off and a flashing 0will appear on the display.If the Rinse Hold option have been selected, the «Door» pilot lightilluminates, a flashing 0 will appear on the display, the Start/Pause light goes offand the door remains locked to indicate that the water must be emptied outbefore opening the door.To empty out the water please read the steps on the Rinse Hold optionparagraph.Turn the programme selector dial to «O» to switch the machine off.Remove the laundry from the drum and carefully check that the drum is empty.If you do not intend to carry out another wash, close the water tap. Leave thedoor open to prevent the formation of mildew and unpleasant smells.Child safety lockThis device permits you to leave theappliance unsupervised without having theworry that children might be injured by orcause damage to the appliance.This function remains able also when thewashing machine is not working.There are two different ways to set thisoption:● before pressing the «Start/Pause»: it will be impossible to start the machine.● after pressing the «Start/Pause» it will be impossible to change any otherprogramme or option.To enable (disable) this option press simoultaneously for about 6 seconds «Stain»and «Sensitive» buttons until the icon appears (disappears) on (from) thedisplay.19Use %