23Programming optionsObjective ImplementationPermanently programin the audible signalwhich reminds you thatthe programme is com-plete.1. Turn the programme selector to any programme.2. Press the AUDIBLE SIGNAL (SIGNAL) button and holddown for approx. 5 seconds.A brief signal sounds several times. The AUDIBLE SIGNAL(SIGNAL) display flashes several times.The setting is permanently programmed.The setting is cancelled as described under 1 and 2.Adjust detection of de-gree of drying:If the laundry is slightlydrier or slightly damp-er at the end of theprogramme than withthe standard setting.1. Turn the programme selector to any programme.2. Press the AUDIBLE SIGNAL (SIGNAL) and SENSITIVE (SEN-SITIV) buttons at the same time and hold down for ap-prox. 5 seconds.The current setting is displayed on the programmeprogress display:– END (ENDE) display: Setting for drier laundry– COOLING (ABKÜHLEN) display: Standard setting– DRYING (TROCKNEN) display: Setting for damper laun-dry3. Press the START/PAUSE button until the setting requiredappears on the programme progress display.4. Turn the programme selector to OFF (AUS).The setting is permanently programmed.If the EMPTY WATER(BEHÄLTER) display is toremain permanentlydeactivated when us-ing an external con-densate drain.1. Turn the programme selector to any programme.2. Press the DELAY TIMER (ZEITVORWAHL) and SPECIALCARE (SCHON) buttons at the same time and hold downfor approx. 5 seconds. The EMPTY WATER (BEHÄLTER) dis-play flashes briefly.The EMPTY WATER (BEHÄLTER) display is permanently de-activated.Settings may be cancelled as under 1 and 2, but the EMPTYWATER (BEHÄLTER) display is briefly illuminated (instead offlashing).