AEG Electrolux Lavatherm 57800 User Information

AEG Electrolux Lavatherm 57800 User Information Manual pdf 14 page image

14Setting time delay3 With the DELAY TIMER button, you can delay the start of a programmeby between 30 minutes (30' and a maximum of 23 hours (23h).1. Select the programme2. Press the DELAY TIMER button as many times as necessary until the re-quired start delay appears on the multi display, e.g. 12h if the pro-gramme is to be started in 12 hours. The DELAY TIMER display isilluminated.3 If 23h is displayed and you press the button again, the time delay willbe cancelled. The display will show 0' and then the duration of the se-lected programme.3. To activate the delay timer, press the START/PAUSE button. The amountof time remaining until the programme is set to start is continuouslydisplayed (e.g. 12h, 11h, 10h, … 30' etc).Starting the programmePress the START/PAUSE button. The programme is started.The programme progress display and the display showing the level ofdryness show drying progress.Changing programmeTo change a programme which has been selected by mistake once theprogramme has started, first turn the programme selector to OFF andthen reset the programme.3 The programme can no longer be changed directly once the programmehas started. If nevertheless there is an attempt to change the pro-gramme on the programme knob, the programme progress display andthe maintenance indicators flash. If an option button (excluding theAUDIBLE SIGNAL button) is pressed, Err appears in the multidisplay.The drying programme is not however affected by this (laundry protec-tion).