AEG Electrolux Lavatherm 57800 User Information

AEG Electrolux Lavatherm 57800 User Information Manual pdf 22 page image

22Changing bulb for interior lightOnly use a special bulb which is designed specially for dryers. The spe-cial bulb is available from the local Service Force Centre.1 Warning! Do not use standard bulbs! These develop too much heat andmay damage the machine!1 Warning! Before replacing the bulb, disconnect the mains plug; with apermanent connection: fully remove the fuse.1. Unscrew the lampcover (this can be found directly behind the loadingaperture, at the top; refer to “Description of machine” section.)2. Replace defective bulb.3. Replace the lampcover.1 Warning! For reasons associated with safety, the lampcover must bescrewed down tightly. If this is not done, the dryer must not be operat-ed.Drying cycle endsshortly after pro-gramme starts. ENDdisplay illuminated.Not enough washing load-ed or washing loaded is toodry for selected programme.Select time programme orhigher drying level (e.g. INTEN-SIVE DRY instead of STORAGEDRY).Drying cycle lasts anunusually long time.Note:After around 5 hoursthe drying cycle endsautomatically (see„Drying cycle com-plete“).Lint filter clogged. Clean lint filter.Heat exchanger cloggedwith lint. Clean heat exchanger.SPECIAL CARE buttonpressed and load volume toobig.SPECIAL CARE is only suitablefor use with loads of up to3kg!Load volume too big. Reduce load volume.Laundry insufficiently spun. Laundry must be adequatelyspun.Problem Possible cause Remedy