AEG HE634400XB User Manual

Also see for HE634400XB: User manual User manual

Contents

Problem Possible cause and remedyThere is no sig-nal when youtouch the pan-el sensor fields.The signals are deactivated. Activate the signals (see OffSound Control).comes on The Automatic Switch Off operates. Deactivate the cooking zone and activate itagain after 60 seconds.If after 60 seconds comes on again speak to the service centre.comes on • No cookware on the cooking zone. Put cookware on the cooking zone.• Not correct cookware. Use the correct cookware.• The diameter of the bottom of the cookware is too small for the cooking zone.Use cookware with correct dimensions.• The cookware do not cove the cross. Cover the cross fully.and num-ber comes on.There is an error in the appliance.Disconnect the appliance from the electrical supply for some time. Disconnect thefuse from the electrical system of the house. Connect again. If comes onagain, speak to the service centre.comes on There is an error in the appliance, because a cookware boils dry. The protectionagainst become too hot for the cooking zone operates. The Automatic Switch Offoperates.Deactivate the appliance. Remove the hot cookware. After, approximately 30 sec-onds activate the cooking zone again. should go out of the display, residualheat indicator can stay. Let the cookware become sufficiently cool and check itwith the section Cookware for the induction cooking zone.If you tried the above solutions and cannot repair the problem, speak to your dealer or theCustomer Care Department. Give the data from the rating plate, three-digit-letter code forthe glass ceramic (it is in the corner of the cooking surface) and an error message thatcomes on.If you operated the appliance incorrectly, the servicing by a customer service technician ordealer will not be free of charge, even during the warranty period. The instructions aboutthe customer service and conditions of guarantee are in the guarantee booklet.ENVIRONMENT CONCERNSThe symbol on the product or on its packaging indicates that this product may not betreated as household waste. Instead it should be taken to the appropriate collection pointfor the recycling of electrical and electronic equipment. By ensuring this product isdisposed of correctly, you will help prevent potential negative consequences for theenvironment and human health, which could otherwise be caused by inappropriate wastehandling of this product. For more detailed information about recycling of this product,please contact your local council, your household waste disposal service or the shop whereyou purchased the product.28 Environment concerns