AEG HG654440 User Manual

Also see for HG654440: User manual User manual

Contents

MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO.SER.NO.03 ITMADE IN ITALYTYPE230V-50HzIP2000491 2 31 Stick it on Guarantee Card and sendthis part2 Stick it on Guarantee Card and keepthis part3 Stick it on instruction booklet8. INSTALLATIONWARNING!Refer to the Safety chapters.WARNING!The following instructions aboutinstallation, connection andmaintenance must be carried outby qualified personnel in compli-ance with standards and localregulations in force.8.1 Important safetyrequirementsThis hob must be installed in accordancewith the Gas Safety (Installation and Use)Regulations (Current Edition) and the IEEWiring Regulations (Current Edition).For appliances installed in the Republicof Ireland please refer to NSAI- Domes-tic Gas Installation I.S. 813 Current Edi-tions and the ETCI Rules for Electrical In-stallations.Provision for ventilationDetailed recommendations are con-tained in the following British StandardsCodes Of Practice: B.S. 6172/ B.S. 5440,Par. 2 and B.S. 6891 Current Editions.The hob should not be installed in a bedsitting room with a volume of less than20 m³. If it is installed in a room of vol-ume less than 5 m³ an air vent of effec-tive area of 100 cm² is required. If it is in-stalled in a room of volume between 5m³ and 10 m³ an air vent of effective areaof 50 cm² is required, while if the volumeexceeds 11 m³ no air vent is required.However, if the room has a door whichopens directly to the outside no air ventis required even if the volume is be-tween 5 m³ and 11 m³.If there are other fuel burning appliancesin the same room, B.S. 5440 Part 2 Cur-rent Edition, should be consulted to de-termine the requisite air vent require-ments.For appliances installed in the Republicof Ireland please refer to the NSAI- Do-mestic Gas Installation I.S. 813 CurrentEditions Table Four.ENGLISH 11