AEG S72388-KA User Manual

Also see for SANTO Series: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

818 42 69-00/2 19Initial Start-Up0 1. Insert plug into mains socket.2. Press ON/OFF button.A warning tone sounds and the red warning light flashes indicatingthat the required storage temperature has not yet been reached. Thecompressor starts and then runs automatically.3. Press the ALARM OFF button to switch off the warning tone.4. Set temperature to +5 °C or colder (see section: "Temperature Adjust-ment").3 Goods to be refrigerated can be loaded immediately after switching on,because the storage temperature in the refrigerator is quickly reached.Temperature AdjustmentWith the buttons for temperature adjustment the desired temperaturesin the refrigerator can be adjusted.0 1. Press either the „+“ (WARMER) or „-“ (COLDER) button.The temperature display switches over and the DESIRED temperaturecurrently set flashes on the temperature display.2. To adjust to a warmer temperature, press the „+“ (WARMER) button. Toadjust to a colder temperature, press the „-“ (COLDER) button. Thechanged setting is immediately displayed on the temperature display.Each time the button is pressed the temperature is adjusted by 1 °C.Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)Note: From a food safety point of view, +5 °C for the refrigeratorcompartment should be considered cold enough as a storagetemperature.3 When the buttons are not pressed again after an adjustment has beenmade, after a short period (approx. 5 sec.) the temperature display swit-ches over and again displays the ACTUAL temperature in the refrigera-tor. The display changes from flashing to static numbers.The compressor will start and then run automatically.Information! When the setting is changed, the compressor does notstart immediately if automatic defrosting is currently taking place.