AEG SANTO Operating Instructions Manual

Also see for SANTO: Installation instructions Installation instructions Installation instructions Operating instructions Operating instructions

62Something not WorkingCorrecting MalfunctionsA malfunction may be caused by only a minor fault that you can rectifyyourself using the following instructions. Do not perform any otherwork on the appliance if the following information does not provideassistance in your specific case.1 Warning! Repairs to refrigerators may only be performed by qualifiedservice engineers. Improper repairs can give rise to significant hazardsfor the user. If your appliance needs repairing, please contact your spe-cialist dealer or our Customer Service.Symptom Possible Cause SolutionNo power to the appliance.Appliance is not switchedon. Switch on the appliance.Mains plug is not pluggedin or is loose. Insert mains plug.Fuse has blown or is defec-tive.Check fuse, replace ifnecessary.Mains socket is defective.Mains malfunctions are tobe corrected by an electri-cian.Appliance cools too much. Temperature is set too cold.Turn the temperature regu-lator to a warmer settingtemporarily.The food is too warm.Temperature is not properlyadjusted.Please look in the " Tem-perature Adjustment" sec-tion.Door was open for anextended period.Open the door only as longas necessary.A large quantity of warmfood was placed in theappliance within the last24 hours.Press the FROSTMATIC but-ton. Turn the temperatureregulator to a colder set-ting temporarily.The appliance is near aheat source.Please look in the "Installa-tion" section.