AEG SANTO Series Operating Instructions Manual

Also see for SANTO Series: User manual Operating instructions Operating instructions Operating instructions Operating instructions

Appliance Description818 36 92-01/4 15Buttons for Adjusting the TemperatureThe temperature is adjusted using the „+“ (WARMER) and„-“ (COLDER) buttons.These buttons are connected to the temperature display.• The temperature display is switched over from the display of theACTUAL temperature (Temperature display is illuminated) to thedisplay of the DESIRED temperature (Temperature display flashes) bypressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).• Each time one of the two buttons is pressed again the DESIRED tem-perature is adjusted by 1 °C.• If neither button is pressed, the temperature display automaticallyswitches back after a short period (approx. 5 sec.) to the display ofthe ACTUAL temperature.DESIRED temperature means:The temperature that is required in the refrigerator, this can beadjusted to the temperatures shown in the display. The DESIREDtemperature is indicated by flashing numbers.ACTUAL temperature means:The temperature display indicates the temperature that is currentlypresent in the refrigerator. The ACTUAL temperature is indicated withilluminated numbers.Temperature DisplayThe temperature display can indicate several pieces ofinformation.• During normal operation, the temperature currently present in themiddle section of the refrigerator (ACTUAL temperature) is displayed.• When the temperature is being adjusted a flashing display indicatesthe fridge compartment temperature currently set (DESIRED temper-ature).• If there is a fault in the appliance the temperature display shows asquare or a letter.