AEG Santo Operating Instructions Manual

Also see for SANTO: Installation instructions Installation instructions Installation instructions Operating instructions Operating instructions

Appliance Description20 818 36 23-02/7Temperature setting buttonsThe temperature is adjusted using the„+“ (WARMER) and „-“ (COLDER) buttons.These buttons are connected to the temperature display.• The temperature display is switched over from the display of theACTUAL temperature (Temperature display is illuminated) to the dis-play of the DESIRED temperature (Temperature display flashes) bypressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).• Each time one of the two buttons is pressed again the DESIRED tem-perature is adjusted by 1 °C.• If neither button is pressed, the temperature display automaticallyswitches back after a short period (approx. 5 sec.) to the display ofthe ACTUAL temperature.DESIRED temperature means:The temperature that has been selected for inside the fridge or thefreezer compartment. The DESIRED temperature is indicated by flashingnumbers.ACTUAL temperature means:The temperature display indicates the current temperature inside thefridge or the freezer compartment. The ACTUAL temperature is indi-cated with illuminated numbers.3 Once the COOLMATIC- or the FROSTMATIC function has been switchedon the DESIRED temperature that was set originally for the fridge orthe freezer cannot be changed.Temperature DisplaysThe temperature displays shows severaltypes of information.• During normal operation, the temperature currently present in thefridge or the freezer compartment (ACTUAL temperature) is displayed.• When the temperature is being adjusted a flashing display indicatesthe fridge or the freezer compartment temperature currently set(DESIRED temperature).• If there is a fault in the appliance the temperature display shows:– a square or a letter in the temperature display of the fridge for afault in the fridge,– a square or a letter in the temperature display of the freezer for afault in the freezer.