AEG Santo Operating Instructions Manual

Also see for SANTO: Installation instructions Installation instructions Installation instructions Operating instructions Operating instructions

8 818 36 23-02/7When disposing of your old appliance:• Make the appliance unusable by cutting off the cable and removeany door catches to ensure small children cannot be trapped inside.• The appliance may not be disposed of with domestic waste or bulkyrefuse.• The refrigerant circuit, especially the heat exchanger at the back ofthe appliance, may not be damaged.Help to keep your country tidy - use an authorised disposal site.Appliance TransportTwo persons are required to transport the appliance. Two handles areprovided on the back of the appliance at the top to enable a betterhold. Before transporting, the plinth cover must be removed to preventdamage.0 1. To remove the plinth cover fromthe stops, tilt downwards and thenpull forwards.Important: Do not damage doorcontact (if present)2. Grip the appliance with therecessed handles positioned as inthe drawing, and transport theappliance.3. In order to push the applianceinto its final position, press care-fully at the top of the door andtip the appliance back slightly.The weight is thus transferred tothe back wheels and the appliance can be easily pushed.4. When the appliance is standing inthe desired place, attach the plinthcover. First hook at the hitches onthe lower edge, then press the gridin position. Make sure that the doorcontact (if present) is not damagedand that it engages in the corre-sponding aperture in the plinthcover.