AEG VS92903M User Manual

Also see for VS92903M: User manual

Contents

AEG VS92903M User Manual Manual pdf 5 page image

4www.aeg.com Disconnect the appliance from the powersupply before carrying out any maintenanceoperation. Do not use abrasive detergents or metalscrapers to clean the appliance.2. SAFETY INSTRUCTIONS2.1. InstallationWARNING!Installation must be carried out byqualified personnel only Remove the packaging material. Do not install or use the appliance ifdamaged. Comply with the instructionssupplied with the appliance. Always pay attention when movingthe appliance and wear safetygloves. Do not turn the appliance upsidedown or tilt it! This may cause oilto leak from the pump anddamage the equipment. Respect the minimum distance fromother appliances. Make sure the appliance is installedand secured to a fixed structure. The sides of the appliance must beadjacent to other equipment orunits having the same height.2.2. Electrical connectionWARNING!Risk of fire and electric shock. All the electrical connections mustbe made by a qualified electrician. The appliance must be earthed. Make sure that all the electrical datashown in the data plate of themodel correspond to those of thesystem. Otherwise, contact anelectrician. Always use a correctly installedshockproof socket. Do not use multi-plug adapters orextension cables. Make sure not to damage the mainsplug and the mains cable. Contactthe Assistance Service or anelectrician to change anydamaged mains cable. Shock protection devices must befastened in such a way that theycannot be removed without tools. Connect the mains plug to the mainssocket only once installation hasbeen completed. Make sure thatthe mains plug can be accessedafter installation. Do not connect the mains plug if themains socket is loose. Do not pull the mains cable todisconnect the appliance. Pullonly the mains plug. Use only suitable isolation devices:circuit breakers, fuses (screw typefuses must be removed from thefuse holder), earth fault currentreleases and relays.The electric system must beequipped with a means fordisconnection, with a contactseparation in all poles that providefull disconnection under overvoltagecategory III.