AYA A22AC2201 Operaing Instructions

Also see for A22AC2201: Operating instructions

Contents

AYA A22AC2201 Operaing Instructions Manual pdf 39 page image

English - 37 -LCD TV and Operating ButtonsFRONT and REAR VIEW Control buttons VIEW Control Buttons1. Standby Off/On button2. TV/AV button3. Programme Up/Down buttons-Volume Up/Down buttonsNote:You can use +/- buttonsto change volume. If you wantto change channels, press P/V/AV button once and then use+/- buttons. If you hold the P/V/AV button about a few seconds,source OSD will be displayed.Main menu OSD cannot bedisplayed via control buttons.Viewing the Back side ConnectionsHDMI 1SPDIFCoax.OUTHDMI 1: HDMI Input1.HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD TV is capable ofdisplaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVDPlayer. These devices must be connected via the HDMI sockets or Component Socket. These socketscan accept either 720p or 1080p (Optional) signals. No sound connection is needed for an HDMI toHDMI connection.RF Input2. connects to an aerial antenna system.Note that if you use a decoder or a media recorder, you should connect the aerial cable through the deviceto the television with an appropriate antenna cable, as shown in the illustration in the following pages.SCART3. input or output for external devices. Connect the SCART cable between SCART socket on TV andSCART socket on your external device (such as a decoder, a VCR or a DVD player).Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.Note: S-VHS signal is supported via the scart socket.PC Input4. is for connecting a personal computer to the TV set.Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.Note: You can use YPbPr to VGA cable(not supplied) to enable YPbPr signal via PC input.