COM Express Module COM-KB3.2 AMI BIOS SetupThe AMI BIOS ROM has a pre-installed Setup program that allows users to modify basicsystem configurations, which is stored in the battery-backed CMOS RAM and BIOSNVRAM so that the information is retained when the power is turned off.To enter BIOS Setup, press or immediately while your computer ispowering up.The function for each interface can be found below.Main – Date and time can be set here. Press to switch between date elementsAdvanced – Enable/ Disable boot option for legacy network devicesChipset – For hosting bridge parametersBoot – Enable/ Disable quiet Boot OptionSecurity – The setup administrator password can be set hereSave & Exit –Save your changes and exit the programChapter 3 – AMI BIOS Setup 24
