Page 54 Aanderaa Data Instruments AS – TD302The Mode property will require a Reset before the change is executed. All other property changes will be executedimmediately.Some property changes will automatically restart the collection of pressure samples, refer chapter 2.4.Some properties are passkey protected and will not be accessible without first writing the passkey. If the passkey isneeded you get the error message: “ERROR PROTECED PROPERTY”. Refer chapter 1.5 for properties and chapter7.2.4 for passkey.7.2.9 Formatting the output stringThe property called Enable Text controls the presentation of measured data. When the property is set to Yes theoutput string includes the descriptive parameter name with engineering units of measure. When the property is setto No, the output parameters are presented without descriptive parameter names and engineering units; theparameter order is the same, refer Figure 7-4 for an example.The property called Enable DecimalFormat controls the format of the output values, either as decimal numbers(Yes), or in exponential format (No). Refer Figure 7-7 for an example.Figure 7-7 Example of output string: decimal/exponential format.The property setting affects the presentation of measured values in the output string, not in the sensors response tothe Get command (which is always in exponential format).
