Aastra Business CommunicationSolutionPlanning Aastra 400 DECT systems as of R1.0User’s GuidePlatforms supported:Aastra 415Aastra 430Aastra 470This document describes the system characteristics theplanning procedure for an Aastra 400 DECT system. Themain element here is DECT measuring equipment ME-8.The document is intended for planners, installers andsystem managers of Aastra 400 communication sys-tems.syd-0457_en / 1.0 – R1.0 – © 10.2012

Aastra 400 Series User Manual

Product and Safety Information

user information

Safety Information

Data Protection

About this System Manual

About Aastra

System interfaces

Network Interfaces

Basic rate interface BRI-T

Point-to-Point and Point-to-Multipoint Connections

Primary rate interface PRI

Clock synchronization

Direct Dialling Out (DDO)

SIP acces

Analogue Network Interfaces

Analogue down-circuit connection

Attenuation on analogue network interfaces

Terminal interfaces

DSI terminal interfaces

IP terminal interface

Analogue terminal interfaces

Special Interfaces

Interface for door intercom system

Interface for general bell

Numbering plan

The System's Numbering Plan

Categories in the Numbering Plan

Exchange Access Categories

Category for abbreviated dialling

Category for emergency number

Category for internal users

Mobile phones

Aastra Mobile Client (AMC)

Virtual terminals

PISN user

Separate Regional Prefix Category

Shared Numbering Plan

PISN with different Regions

Identification elements

Internal and External Ringing Patterns

Displaying Numbers (CLIP) and Names (CNIP)

Displaying the CLIP

CLIP with Incoming Calls

Presentation of the CLIP on the Terminal

Replicating the Name Display in the Communication Server

Flow charts for name identification (CNIP)

CLIP with Outgoing Calls

Entering a fixed CLIP

CLIP flowcharts for Outgoing Calls

CLIP Display with a Virtual Network PISN User

Outgoing call with local call forwarding

Incoming call that is already redirected

Incoming call with CDE overflow

CLIP / COLP Settings

User

CLIP/CLIR settings

Examples of CLIP Displays in the PISN

PISN-Internal Calls

Outgoing Calls to the Public Network

Incoming calls from the public network

CLIP format for transit connections in networks

CLIP on analogue exchange accesses

Routing elements

Overview

Trunk groups

Trunk Groups of Network Interfaces

Routing Functions of the Trunk Group for Incoming Calls

Route

The Route's Routing Functions

Other Routing Functions for Outgoing Calls

Direct Dialling Plan (DDI plan)

Call Distribution Element (CDE)

Call destination

Routing Functions for Incoming Calls

Other Functions and Settings of the CDE

Switch Groups

User Group

Ordinary user groups

Call distribution in the member group

Large user groups

User Groups for Voice Mail and Other Applications

Application example for a user group

User Configuration

Operator console

Routing Functions for Outgoing Calls

Capolinea

General bell

Using Terminals as Key Telephones

400 Series