Product information6 eud-1280/1.0 – R1.0 – 12.2010Product informationSafety informationFailure to observe this information can be hazardous and infringe existing laws.ConnectionsAlways plug the phone cable connectors into the appropriate sockets. Do not modifythe connections in any way.Mains powerUse the original power supply only. Connect the power supply only to power sourcesthat conform to the indications on the power supply. The device will be inoperablewhen mains power of the communications system fails.Retention of Metal ObjectsTelephone receivers produce magnetic fields that can attract small metallic objects suchas pins and staples. To avoid injury, do not place the handset where such objects can bepicked up.MaintenanceMake sure all installation and repair work is carried out by a specially qualified techni-cian.Always use a soft, moistened, or antistatic cloth to clean your device. Do not use chem-icals or other chemical products.Cost control and Data protectionYou should protect your device with a PIN so that no-one can make phone calls at yourexpense. A code will also protect your personal settings.Ambient conditionsDo not operate the device outside the temperature range of +5 °C to approx. +40 °C.Avoid direct sunlight and other sources of heat.Protect your device against the wet, excessive dust, corrosive liquids and steam.Do not expose your device to electromagnetic fields (electric motors, household appli-ances). The speech quality could be affected. To prevent interference, avoid placing yourhandset in the immediate vicinity of computers, radios, TV sets, VCRs, and other tele-phone sets.DisposalBe sure to dispose of your device, batteries and its packaging in an environmentallycompatible way. Electrical equipment does not belong in domestic waste. Deposit it ata return centre.AccessoriesUse original accessories or specifically approved accessories only. The use of otheraccessories may decrease performance or pose a risk to your health or safety.1 205