Operator Console81eud-0850/2.1 — I7.7 — 10.2008Setting the operator consoleYou can configure up to 10 line keys on level 1 of an Aastra M535.■ Adding and setting operator linesYou can make a number of settings that affect the telephone's response when someone calls ona Line key.Note:The settings are made once for all the Line keys.Menu Setting the operator console:Press the Menu Foxkey.SettingsScroll to Settings and press the Select Foxkey.OperatorScroll to Operator and press the Select Foxkey.Company A/B Depending on the configuration select Company A or Company B.➯ The display shows the properties with which you can configure the line key.Select the required audio setting and confirm with the Ok Foxkey.Setting possibilities for ringing:• Off for no ringing tone, On for instant ringing tone, and ringing tone Del 10s,Del 20s and Del 30s and confirm Ok with the Foxkey.• Melody, andSpeed: You can listen to each setting using the Test Foxkey.Setting possibilities for answering mode:• Key to answer the call by pressing the line key, Handset to answer by pickingup the handset, and Hands-free to answer automatically with hands-free.• Using Handset or Hands-free, you must also specify the Priority, with 1 beingthe highest priority, and 8 the lowest. This setting is useful for the two-com-pany systems.Notes:The Handset and Hands-free settings only work when the ringing signal is acti-vated.Setting possibilities for answering mode:Key for making the call by pressing the Line key and Handset for making the callby picking up the handset.Setting possibilities for call list:Insert for an entry in the call list and Do not insert for no entry.
