Installation and First-Time Operation96eud-0850/2.1 — I7.7 — 10.2008■ Wall mountingYou can also mount the phone on the wall. To do so, screw the stand rest onto the wall as abracket and hook the phone onto the stand rest.• Fit the screws for securing the stand rest and mount the stand rest (Figure A).• Connect the handset and phone cord to the phone (Figure B). For the correct connectionassignment refer to Chapter "Connecting Aastra 5380", page 97 and "ConnectingAastra 5380ip", page 98.• Insert the phone into the stand rest horizontally (Figure C-1) and slide downwards (FigureC-2).• Unscrew the cams for holding the handset (Figures D-1 to D-3).• Insert the handset.Notes:• As there is only a limited amount of space between the sockets on the back of the phone and the wallon which it is mounted, you need to use a ribbon cable with a short connector for the cord. Ask yourdealer for a list of suppliers for a suitable ribbon cable (only Aastra 5380ip).• You can only connect one Aastra M530 resp. one Aastra M535 (option) if the phone is wall-mounted.1223C D151 mm145 mm130 mm65 mm3.5 mm
