90 Model 55i IP Phone User GuideLine Keys, Programmable Keys, and Softkeys Park/Pickup KeysThe IP phone has a park and pickup call feature that allows you to park a call andpickup a call when required. There are two ways a user can configure this feature:• Using a static configuration• Using a programmable configuration (using keys)The IP phone supports the Park/Pickup feature on the Asterisk, BroadWorks,Sylantro, and ININ PBX servers.The following paragraphs describe the park and pickup methods of configuration onthe IP phones.Park/Pickup Static ConfigurationYou can configure a static configuration for parking and picking up a call using theAastra Web UI at Basic Settings-> Preferences.By entering the appropriate value in the "Park Call" and "Pickup Parked Call"fields, you tell the phone where to park a live call and where to pickup the parkedcall.On the IP phone UI, the static configuration method displays the following:• When a call comes in, and you pickup the handset, the default label of "Park"displays on the Phone UI.• After pressing the "Park" key to park the call, the default label of "Pickup"displays on the phone UI.The values you enter in the Aastra Web UI for the Park/Pickup call feature aredependant on your type of server. The following table provides the values you enterfor the "Park Call" and "Pickup Parked Call" fields in the Aastra Web UI.Note: The IP phone accepts both methods of configuration. However, to avoidredundancy, Aastra Telecom recommends you configure either a staticconfiguration or a programmable configuration.Note: On the 55i handset, pressing Ï displays the "Park" and "Pickup" labels.
