Supplementary featuresAastra 610d 45eud-1093/1.0 – I7.8 – 05.2009Setting functions by remote controlThis section explains how you can change your phone's settings even if you are not directly at yourphone.You are not at your desk and want to set various functions on your phone from a differentphone.You can activate/deactivate many of your phone's functions by remote control from a differentphone.The remote control is initiated using a special */# procedure. You can then enter the functioncommands and */# procedures. Using remote control from a third-party phone:1. Enter */# procedure #36.2. Enter your phone number.3. Enter your PIN.4. Enter the */# procedure for activating/deactivating the function you want.Press the Call key.➔ Acknowledgement tone sounds; function is activated/deactivated.Note:The factory setting "0000" is not accepted. First change the PIN as described inchapter "Changing the PIN", page 56 or use the */# procedure *47 (see "User’sGuide */# Procedures"). If you have forgotten your PIN, your system administra-tor can reset it to the factory setting.
