Using Added Features to Make Efficient Phone Calls21Requesting a CallbackYou want to talk to a certain person. The person is busy or does not answer. You can make callbackrequests to both internal and external subscribers. Not all providers support this function.If the called party is busy, you can request an automatic callback. In this case, your phone will start ringingas soon as the party you are trying to reach goes on-hook. When you pick up the handset, the calledparty's phone will start ringing.If the called party does not answer, you can also request a callback. The called party will see a continuousvisual reminder of your callback request.Answering Call WaitingYou are in a call and hear the call waiting tone. Someone is urgently trying to reach you.You can either answer, deflect or reject the call.Situation You called someone and hear the busy tone or dialling tone.Callback To activate a callback request: Press the "Callback" Foxkey.The display shows "Executed".Put the handset on-hook.The display shows "Call expected ..." and "Reset".Note You can have only 1 active callback request at a time. Your callback requestwill automatically be cancelled by the system after about half an hour.You can also cancel the callback request beforehand.Reset Cancelling the callback request: Press the "Reset" Foxkey.Answer Answering the call: Press the "Answer" Foxkey.1. Your original call partner is put on hold. You are now connected withthe party who initiated the call waiting.– or –Deflection Press the "Deflect" Foxkey.Enter destination subscriber as defined in the Chapter "Deflect a Call Duringthe Ringing Phase".– or –Reject Rejecting the call: Press the "Reject" Foxkey.You remain connected with your original call partner. The call-waitingparty hears the busy tone.☛