130OpenCom 100 131150Mounting and CommissioningUser Guide

Aastra OpenCom 100 Mounting And Commissioning User Manual

OpenCom 510

Systematic Telephony

Home User / FMC

Glossary

Dialling into the Communications System (Home User / FMC)

Making Internal Calls

Accepting a Call

Parking a Call

Several Parties

Toggling

Transferring a Call without Notifying the Destination Party

Ending a Three-Party Conference

Call Protection

Call Protection On/Off

User Groups

Logging out of/into All Hunt Groups

Forwarding Calls

Call Forwarding "Immediately

Call Forwarding "After Delay

MSN Call Forwarding

All Call Forwarding Off

Special Calls

Announcement

Dialout for Another Terminal

PIN Dialling

Take

Keypad Dialling

Even More Protection

Changing the User PIN

Special Modes

Time Control

Remote-Controlled Functions

Remote-Programmable Call Forwarding

Calling a Voicebox from a Remote Terminal

Setting up an Internet Connection from Remote

Index

You Need Authorisation

making calls

Speed Dialling

Accessing Your Voicebox

disconnecting a call

Rejecting a Waiting Call

Logging out of/into Individual Hunt Groups

Call Forwarding for Specific Call Numbers

Door Opener

CSTA application Operation

Calling Line Identification Restriction (CLIR) on a Call-by-Call Basis

Intercept

Deleting All Call Forwarding in the Exchange

Setting up an Internet Connection from Remote (ISP Trigger Call)

Features

Factory Settings

Internet Functions

Preliminary Information

Declarations of Conformity

Installation

Notes on the Mains Supply

Notes on Installing the OpenCom 510

Notes on Installing Terminals

Installation in a 19" Rack

Installing Modules

Slots

Notes on Disconnecting the Mains Supply

Installing the Central Control Module

Installing Interface Cards

Installing a Power Supply Unit

Backplane

Uninterruptible Power Supply

Interfaces and Connectible Terminals

Port

Termination

Internal S 0 Ports

Technical Information

DECT Base Station Connection Variants

a/b Ports

LAN Port

Service PC

Accessories and Adapters

Audio Adapter

Approved Devices / Approved Accessories

Device Combinations

Modules

Module Naming Conventions

Overview of Available Modules

MPS+1-AC

MC+1-3

MT+S2M1-1

MX+S01-8

MS+UPN1-8

MS+UPN2-8

MS+A1-8

MS+A1-4

Configuration

Brief Guide to Initial Configuration

Configuring the OpenCom 510

Loading the Online Help

Preconfiguration

Codes for IP Configuration

Saving and Loading the Configuration

Loading SW Updates

Generating Your Own MoH Files

Configuration Examples

Introduction to TCP/IP

OpenCom 510 in a Serverless LAN

DNS Name Resolution

RAS Access

OpenCom 510 in a LAN with an IP-enabled Server

Internet Access

Branch Link

Useful Information on Internet Access

E-mail

Voice over IP (VoIP)

Fundamentals

Latency and Packet Length

Voice Quality

Optimisation

Useful services

MG+ETH1-1

SIP Telephony

VoIP System Telephones

VoIP System Telephone Configuration

LAN DHCP Server

Start Procedure

OpenPhone IPC

DECTnetIP

Dual operation

Synchronisation

PBX Cascading

Putting a Cascaded PBX into Operation

Notes

Licensing Information

PBX Networking

Connections

Master/Slave

Types of Point-to-Point Connections

Connection via an Active Transmission System

Connection via Q.SIG.IP

Routes

system telephones

Keypad extensions

Headset

Offline Configurator

Using the Web

Quick start

External SIP Line

Internal SIP telephony

Call set-up

Media Gateway (MGW)

Internal SIP subscribers

Local Configuration

DECToverIP

Configuring for a remote location

Protocol: Q.SIG or DSS1

Trunk groups

Numbering

OpenCom 100

OpenCom 130

OpenCom 131

OpenCom 150

OpenCom X320