Abatron BDI2000 User Manuals

Also see for BDI2000: Installation manual Installation manual User manual User manual User manual

Abatron BDI2000 User Manuals Manual pdf 11 page image

bdi CW BDM interface for CodeWarrior™ Debugger, BDI2000 (MPC5xx/8xx) User Manual 11© Copyright 1992-2001 by ABATRON AG V 1.022.4.2 Ethernet communicationThe BDI2000 has a built-in 10 BASE-T Ethernet interface (see figure below). Connect an UTP (Un-shilded Twisted Pair) cable to the BD2000. For thin Ethernet coaxial networks you can connect acommercially available media converter (BNC-->10 BASE-T) between your network and theBDI2000. Contact your network administrator if you have questions about the network.The following explains the meanings of the built-in LED lights:LED Name DescriptionLI Link When this LED light is ON, data link is successful between the UTPport of the BDI2000 and the hub to which it is connected.TX Transmit When this LED light BLINKS, data is being transmitted through the UTPport of the BDI2000RX Receive When this LED light BLINKS, data is being received through the UTPport of the BDI200010 BASE-TPC HostTarget SystemEthernet (10 BASE-T)1 - TD+2 - TD-3 - RD+4 - NC5 - NC6 - RD-7 - NC8 - NCConnectorRS232 LI TX RX 10 BASE-TBDI2000AAAAbbbbaaaattttrrrroooonnnn AAAAGGGG SSSSwwwwiiiissssssss MMMMaaaaddddeeee1 8RS232 POWER LI TX RX 10 BASE-TRev. ARev. B/C1 8 MPC5xx8xx