Abatron BDI2000 User Manuals
Also see for BDI2000: Installation manualInstallation manualUser manualUser manualUser manual
                         | |
Contents
| 
bdi CW BDM interface for CodeWarrior™ Debugger, BDI2000 (MPC5xx/8xx) User Manual 23© Copyright 1992-2001 by ABATRON AG V 1.02B MaintenanceThe BDI needs no special maintenance. Clean the housing with a mild detergent only. Solvents suchas gasoline may damage it.If the BDI is connected correctly and it is still not responding, then the built in fuse might be damaged(in cases where the device was used with wrong supply voltage or wrong polarity). For exchange thefuse or special initialization, please proceed according to the following steps:Observe precautions for handling (Electrostatic sensitive device)Unplug the cables before opening the cover.Use exact fuse replacement (Microfuse MSF 1.6 AF).!123BDI2000AAAAbbbbaaaattttrrrroooonnnn AAAAGGGG SSSSwwwwiiiissssssss MMMMaaaaddddeeee1.1 Unplug the cablesBDI TRGT MODE BDI MAIN BDI OPTION2.1 Remove the two plastic caps that cover the screws on target front side2.2 Remove the two screws that hold the front panel3.1 While holding the casing, remove the front panel and the red elastig sealing(e.g. with a small knife)front panelplasitc sealingcasing |
Related manuals for Abatron BDI2000
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine