Abbott FreeStyle Libre Quick Start Manual

Also see for FreeStyle Libre: User manual Quick start guide User manual Software update Interactive Tutorial

Abbott FreeStyle Libre Quick Start Manual Manual pdf 1 page image

CODEAbbottDiabetesCareInc.1360S outhLoopRoad,Alameda,CA94502ART36505Rev.101/16FreeStyleLibreSensor ApplicatorAplicador del sensorXXXXXXXXXXXYYYY-MM-DDXXXCODEAbbot tD i a b e t e sCareInc.1360SouthLoopRoad,Alameda,CA94502ART36504Rev.108/15Sensor Pack | Envase del sensorCustomer Service | Atención al cliente:1-855-632-8658XXXXXXXXXXXXXXYYYY-MM-DDFreeStyleLibreSTEP 3STEP 6STEP 9Get ReadyApply Sensor Prepare Sensor ApplicatorClean site with alcohol wipe. Allowsite to dry before proceeding.Peel lid completely off Sensor Pack.Unscrew cap from Sensor Applicator.CAUTION: Sensor codes mustmatch on Sensor Pack andSensor Applicator or glucosereadings will be incorrect.Select site on back of upper arm.Do not use other sites as these are notapproved and may result in inaccurateglucose readings.Note: Avoid scars, moles, stretchmarks, lumps, and insulin injectionsites. To prevent skin irritation, rotatesites between applications.Refer to your User’s Manual for full system instructions and information.TouchscreenHome ButtonUSB PortSensorPackReaderPlace Sensor Applicator over siteand push down firmly to applySensor.CAUTION: Do not push down onSensor Applicator until placedover prepared site to preventunintended results or injury.Make sure Sensor is secure.Discard used Sensor Applicatorand Sensor Pack according tolocal regulations.Gently pull Sensor Applicatoraway from your body.Quick Start GuideSTEP 1STEP 4STEP 7STEP 2STEP 5STEP 8Line up dark mark on SensorApplicator with dark markon Sensor Pack. On a hardsurface, press down firmlyon Sensor Applicator until itcomes to a stop.Sensor Applicator is ready toapply Sensor.CAUTION: Sensor Applicatornow contains a needle. Do nottouch inside Sensor Applicatoror put it back into Sensor Pack.Lift Sensor Applicator out ofSensor Pack.Lid CapSensorSensorApplicatorCodes on labelsmust match●1 Assemble and Apply Sensorto the back of your upper arm●2 Start new Sensor with ReaderWait 12 hoursfor start-upYou can check your glucose wheneveryou want for up to 10 daysSetup Overview●1 Assemble and Apply Sensor to the back of your upper armFLASH GLUCOSE MONITORING SYSTEM4.5”4.5”4.5”

/ 2

Related manuals for Abbott FreeStyle Libre