Appendix B. TroubleshootingTroubleshooting for power/battery/connections• If the ROL does not respond to any button, make sure the battery ischarged. If the battery is depleted, connect the power adaptor to charge thebattery. If the battery is fully charged, but the device stopped responding toany Button, turn the device off, then on again.• If the adaptor does not power the ROL, check the connections. Make surethe power adaptor is firmly connected to the ROL and to the power outlet. Ifthe adaptor still does not power the unit, contact Abisee or your ABiSeedistributor.• If the battery does not power the ROL, The battery may be depleted.Connect the power adaptor to charge the battery.Troubleshooting: Scan and Read Application• If the text you are reading does not make sense, do not stress Scan Button.Press it and wait for the shutter sound. Make sure your reading language isthe same language as your document. Switch to/from tables reading mode.• If the text recognition takes unusually long before starting to read yourdocument, or it is not accurate, make sure your reading language is the samelanguage as your document. Place a document, leaving it still and makingsure there is nothing between the cameras and the document. Press ScanButton just once, and wait for the shutter sound. Do not stress the Daisy keysduring the OCR process; wait until OCR is done before you navigate throughthe text.Troubleshooting the Calendar Application• If you do not hear the reminder after you finished your recording, increasethe volume – turn Volume Knob clockwise. Make sure that when you aretalking your face is close to the device.• If you think that you did not hear the reminder you have entered at theright date/time, go to Main Menu and Select Calendar.Then use the RightRoller to scroll to All Reminders and press the Action Button check if theexpected reminder exists. It is most likely that it has not been scheduled forthe time you tried to hear it.21