Abit IL-90MV User Manual

Contents

Abit IL-90MV User Manual Manual pdf 45 page image

BIOS SetupiL-90MV 3-173.5 Power Management SetupPhoenix – AwardBIOS CMOS Setup UtilityPower Management SetupACPI Suspend Type S3(Suspend To RAM) Item Help- Resume by USB From S3 EnabledPower Button Function Instant-OffCPU THRM-Throttling 50.0%Wake Up by PME# of PCI DisabledWake Up by WAKE# of PCIe DisabledWake Up by Onboard LAN DisabledWake Up by Onboard 1394 DisabledWake Up by Alarm DisabledX - Date(of month) Alarm 0X - Time(hh:mm:ss) Alarm 0 : 0 : 0Power On Function Button OnlyX - KB Power On Password EnterX - Hot Key Power On Ctrl-F1Restore On AC Power Loss Power Off:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General HelpF5: Previous Values F6: Fail-Safe Defaults F7: Optimized DefaultsACPI Suspend TypeThis item selects the type of Suspend mode.[S1(PowerOn Suspend)]: Enables the Power On Suspend function.[S3(Suspend To RAM)]: Enables the Suspend to RAM function.- Resume by USB From S3When set to [Enabled], this item allows you to use a USB device to wake up a system that is inthe S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPISuspend Type” is set to [S3(STR)].Power Button FunctionThis item selects the method of powering off your system:[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system.This will prevent the system from powering off in case you accidentally hit or pushed the powerbutton.[Instant-Off]: Pressing and then releasing the power button at once will immediately poweroff the system.Wake Up by PME# of PCIWhen set to [Enabled], access through the add-on PCI card can remotely wake up the systemthat was in Soft-Off condition. The PCI card must support the wake up function.