Driver & Utility CDiL-90MV 4-54.3.1 Tips on HDMI application1. Connects to your HDMI device from the connector “HDMI1” only with anHDMI-to-HDMI cable. DO NOT connect with an HDMI-to-DVI cable.2. Connect your HDMI digitaldevice to port “HDMI1” locatedat the rear I/O panel of thismotherboard.3. Select the type of displaydevice. For “HDMI” connection,you will have to configure theBIOS parameter:(1) Enter the BIOS SetupMenu: “AdvancedChipset Features” “HDMI Port Display”.(2) Change the option from thedefault [DVI] to [Normal].4. After completed the driverinstallation of “Intel GraphicsMedia Accelerator”, if thereis no graphics output whenrestarting the system, try enterHot Keys <Ctrl> + <Alt> +<F1> simultaneously to regain.5. For the application of HDMIdigital device:(1) Check to see if the screenresolution in the [DisplayProperties] is limited to“720 x 480” or lower thanthe one of your HDMIdigital device.
