AbleNet BIGtrack Wireless Quick Start Manual

Also see for BIGtrack Wireless: Quick start guide

AbleNet BIGtrack Wireless Quick Start Manual Manual pdf 1 page image

Quick Start GuideBIGtrack Wirelesswww.ablenetinc.com(800) 322-0956(11/19 Rev. A)Connect to an iPad or iPhoneRequires iOS 13 or iPadOS 13 or newer1. On the front of BIGtrack Wireless, select Bluetooth2. On iPad or iPhone go to Settings App > Accessibility >Touch > AssistiveTouch > Turn AssistiveTouch on3. On the iPad or iPhone Settings App > Accessibility >Touch > AssistiveTouch > Devices > Bluetooth Devices >Select your BIGtrack Wireless from the list of availabledevices4. On the iPad or iPhone, select Pair5. Once connected a circle cursor will appear on thescreen of the device6. Left-clicking will select items. Right-clicking will bringup the AssistiveTouch menu for additional actions.Connect with BluetoothCompatible with most macOS, Windows, ChromeOS, andAndroid devices that have a Bluetooth receiver.1. On the front of BIGtrack Wireless, select Bluetooth2. On the device, go to the Bluetooth settings menu toconnect a new Bluetooth device3. Select your BIGtrack Wireless from the list of availabledevicesConnect with USB wireless receiverCompatible with most macOS, Windows 10, ChromeOS, andAndroid devices that have a USB Type-A port.1. Locate the USB wireless receiver inside of the batterycompartment of BIGtrack Wireless.2. Connect the USB wireless receiver to a USB Type-A porton your device3. On BIGtrack Wireless, select the USB receiver modeBatteriesBIGtrack Wireless requires 2 AA batteries. Batteries notincluded.Accessibility switches for left and right-clickingOn the left and right side of BIGtrack Wireless are 1/8-in /3.5-mm switch jacks. Connect any accessibility switch witha 1/8-in / 3.5-mm mono plug. Activating the accessibilityswitch will then activate a left or right-click.For accessibility switches, visit www.ablenetinc.com.Drag lockDrag lock is a feature that enables a user to lock the mousecursor onto an item and then drag that item without havingto hold down the left click button.We recommend turning drag lock off when using BIGtrackWireless with an iPad or iPhone. When drag lock on BIGtrackWireless is turned on, the user will experience a delay in theright-click on the iPad or iPhone.To use drag lock:1. On BIGtrack Wireless, turn drag lock to on2. Connect BIGtrack Wireless to your device3. On the device, position mouse cursor over the item youwould like to move4. Right-click two times within 1-second and the mousecursor will lock onto the item5. To release, single left or right-clickPair ButtonIf BIGtrack Wireless is paired with a Bluetooth device that isnot available and you need to pair it with a new Bluetoothdevice, hold the pair button down for five-seconds until theindicator light flashes three times. Turn BIGtrack Wireless off,then back on again to pair with a new Bluetooth device.1/8-in / 3.5-mm MonoAccessibility SwitchJack for Left-Click1/8-in / 3.5-mmAccessibility Switch Jackfor Right-ClickLeft-Click Right-ClickTrackballUse Mode Selection: Bluetooth, Off, USBwireless receiverPair ButtonIndicator LightDrag Lock Selection2 AA Batteries(not included)USB Wireless Receiver