AbleNet WAVE Quick Start Manual
Pairing TroubleshootingIf your WAVE unit does not operate correctly, please use the following guide to deter-mine the cause. If, after following this guide, your unit still does not operate, pleasecontact AbleNet technical support at 800-322-0956.SymptomWarrantyAbleNet offers a limited, 24-month warranty on the WAVE trackball. For full warrantydetails, visit www.ablenetinc.com.Your WAVE uses a unique addressing system to ensure that there is no interferencefrom neighboring units. The Trackball transmits its data along with an address, andthe Receiver unit only responds to that address.To function correctly, both the Trackball and Receiver unit must use the same address. Theprocess of negotiating an address is called 'Pairing' and once learned, both the Trackballand Receiver units will retain the information even when powered off or when changing thebattery.Your WAVE is already paired by the manufacturer, but it may occasionally be neces-sary to go through the process again – for instance if a new Receiver is to be usedwith an existing Trackball unit or in the unlikely event that one half 'forgets' theaddress.To Pair the units, use the following procedure:1. Remove the battery compartment cover.2. Place the Trackball within three feet of the Receiverunit.3. Press the button on the bottom ofthe Receiver unit. The LED should flash.4. Within 10 seconds,briefly press thebutton inside the battery compartment.5. After a short period the LED shouldlight steadily for 5 seconds and cursoroperation should resume. Replace thebattery compartment cover.6. If the LED stops flashing after around15 seconds and does not light steadily,repeat the process from (Step 3). If it is stillnot successful, please refer to the Troubleshootingsection.Possible cause/ RemedyNo cursor movement-LED remains lit- Units are not Paired. Follow procedure inPairing section.No cursor movement-LED is not lit.- Check connection to computer.- Units may not be Paired. Followprocedure in Pairing section.Cursor movement iserratic or sporadic.- Battery may be dead - replace battery.- Place Receiver unit away from metal objectsand in view of Trackball operating area.- Out of range. Move Trackball closer toReceiver.- Interference from other radio equipment.Change channels by rebooting computer.Units will not Pair -LED is extinguishedafter 15 seconds andcursor does not move.- Ensure that Trackball is within three feetof Receiver while Pairing.- Check battery- replace if dead.WAVE is the very first, wireless trackball specifically designed for users witha variety of fine and gross motor skills.With an operating range in excess of 30 feet, WAVE is ideally suited for usein team/group sessions, or classroom settings, to ensure participation incomputer-based activities.Lightweight and robustly constructed with no mechanical wearing parts,WAVE can be used as either a desktop or hand-held unit.Optical technology ensures precise cursor control and silky-smooth ballmovement. The bi-directional radio link provides interference free operation.Product DescriptionWireless Trackball |
Related manuals for AbleNet WAVE
AbleNet Duo Quick Start Manual
AbleNet BIGtrack 2 Quick Start Manual
AbleNet BIGtrack 2 Quick Start Manual
AbleNet TrackerPro 2 Quick Start Manual
AbleNet TrackerPro 2 Quick Start Manual
AbleNet BIGtrack Wireless Quick Start Manual
AbleNet BIGtrack Wireless Quick Start Manual
AbleNet TrackerPro 2 Quick Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine