TrackerPro™ 2www.ablenetinc.com(800) 322-0956Getting Started:1. Place TrackerPro 2 directly in front of the user.TrackerPro 2 can be attached to a monitor using theincluded dual lock or placed on a flat surface usingthe included desktop stand.2. Plug TrackerPro 2 into available USB Type A port oncomputer. The Power/Status LED on TrackerPro 2 willturn red.3. Place a TrackerPro 2 reflective dot on forehead of user.4. Position the mouse cursor in the center of the devicescreen before the user starts.5. Position user 12-in to 36-in (30-cm to 91-cm) awayfrom TrackerPro 2.6. The Power/Status LED on TrackerPro 2 will turn greenonce it detects the reflective dot on the user.7. Small head movements will move the mouse cursoron the computer. If the user is unable to move themouse cursor across the entire screen, try adjustingthe mouse cursor speed.Cursor Positioning:When a user first starts or after using TrackerPro 2 for aUpdated March 4, 2020 4:40 PMDesktop StandPower/Status LEDRight Mouse ClickUSB Type AConnectionLeft Mouse ClickDual LockSpeed Select(On Back)period of time, the user may find that the mouse cursordoes not reach the far edges of the device screen. To re-orient the mouse cursor:1. The user should move their head as far up and then asfar down as it can go. The mouse cursor may stop andpush up against the edge of the screen on the up ordown movement of the head. Repeat the up and downmotion multiple times. This movement will re-orientthe mouse cursor in the vertical direction.2. The user should move their head as far left and thenas far right as it can go. The mouse cursor may stopand push up against the edge of the screen on the leftor right movement of the head. Repeat the left andright movement multiple times. This movement willre-orient the mouse cursor in the horizontal direction.3. If neither of the above steps works to reach the edgesof the screen with the mouse cursor:a. On the back of TrackerPro 2, turn the small toggleswitch to Ib. On the device, go into the setting for the mousetracking speed and turn it upMouse Click Options:• Plug one or two switches into TrackerPro 2. The whiteswitch jack is for left mouse click and the black switchjack is for right mouse click.• For use without switches, use a dwell selectionsoftware.• Windows: Dwell Clicker 2 (purchased separate)• macOS Mojave or newer: Dwell selection is partof the accessibility settings for the keyboard• Google Chrome OS: Dwell selection is part of theaccessibility settingsMouse Cursor Speed Adjustment:• On the back of TrackerPro 2, move the speed selectorswitch to change mouse cursor speed.• I = fast• II = slow• For more control, find the mouse cursor speedadjustment within the computer operating system