Quick Start GuideBlue2™Custom ModesBlue2 allows you to record custom key sequences to create a custommode.1. Turn Blue2 on using the on/off switch.2. Plug a USB keyboard into the USB programming jack.3. Turn the learn switch to on by moving it to the left.4. Select Mode 4, 5, or 6.5. Activate Switch 1 to start recording mode. The S1 light will blinkwhile in recording mode.6. Activate up to four keystrokes that you would like recorded to Switch1 on the USB keyboard.7. Activate Switch 1 to stop recording mode.8. Activate Switch 2 to start recording mode. The S2 light will blinkwhile in recording mode.9. Activate up to four keystrokes that you would like recorded toSwitch 2 on the USB keyboard.10. Activate Switch 2 to stop recording mode.11. Turn the learn switch to off by moving it to the right.12. Remove USB keyboard.13. Select your new mode to use.Pairing With A New DeviceIf Blue2 has already been paired with a device, you must first unpair itfrom the original device before it can be paired with a new device. Tounpair, go into your devices Bluetooth settings, find the device namedBLUE2, and choose to Forget This Device. You can now follow the Blue2setup procedure to pair with the new device.Battery ChargingBlue2 is powered by an internal rechargeable battery. Charge Blue2 to fullpower before using.To charge:1. Select appropriate wall adapter for your region.2. Insert micro USB portion of wall charger into the micro USBcharging jack on Blue2 and plug wall adapter into wall outlet.3. While charging the switch indicator lights S1 and S2 will blink onand off. When fully charged the switch indicator lights will remain lit.Setup1. Turn Blue2 on using the on/off switch.2. Activate the pairing button on Blue2.3. In your devices Bluetooth® settings select BLUE2.4. Activate the mode button on Blue2 to select a mode.5. Set up any settings for switch access within the app you will beusing on your device.6. Blue2 is now ready for use with your device and app.Note: If your app does not work with a mode, try another mode. Ifneither Mode 1, 2, or 3 work, contact your app developer to determinethe keystrokes being used and then create a custom mode toaccommodate your app.Switch UseOnce setup, activate Switch 1 (white switch top) or Switch 2 (orangeswitch top) to use with an app.If you would like to use one or two external switches with Blue2, insert the3.5mm switch plug of the external switch into switch jack S1 or switchjack S2. The external switch will now control the app on your device.Use ModesBlue2 is preprogrammed with three modes of operation to accommodatethe standard protocols used for switch access to apps. In addition, a usercan program their own custom sequence of keystrokes to modes 4, 5,and 6.• Mode 1: Space and Enter• Mode 2: 1 and 3• Mode 3: ~1 and ~3• Mode 4: User defined• Mode 5: User defined• Mode 6: User definedSleep ModeAfter 30-minutes of inactivity, Blue2 will go into sleep mode. To wakefrom sleep mode, activate Switch 1 (white switch top) or Switch 2 (orangeswitch top) and wait approximately 7-seconds for Blue2 to re-pair withyour device.On-screen KeyboardIf using an iOS device with Blue2, activating the keyboard toggle buttonon Blue2 will bring up the on-screen keyboard. To hide the on-screenkeyboard activate the keyboard toggle button a second time.Switch 1(White)Switch 2(Orange)On/OffSwitchMode ButtonLearnSwitch Switch Jack 1Switch Jack 2Micro USBCharging JackUSBProgrammingJackKeyboardToggleButtonPairingButtonModeIndicatorLightsSwitchIndicatorLights