Abrams UG-1200 Installation And Configuration Manual

Abrams UG-1200 Installation And Configuration Manual Manual pdf 1 page image

Specifications120.6mm32.2mm14.3● LED: 3W*12 Spilt/Dual● LEDs per head : 12● Voltage : 10-30VDC● Flash patterns : 69● Color : Color 1* Color 2Proper installation of this product requires the installer to have a goodunderstanding of automotive electronics, systems and procedures.Failure to use specified installation parts or hardware will void theproduct warranty.For this product to operate at optimum efficiency, a good electricalconnection to chassis ground must be made.It is recommend that these instructions be stored in a safe place andreferred to when performing maintenance or reinstallation of thisproducts.Do not install and/or operate this safety product unless you have readand understand the safety information contained in this manual.This document provides all the necessary information to allow your product to be properly andsafely installed. Before beginning the installation and operation of your new product, theinstallation technician and operator must read this manual completely.P52 Quad 75FPM is Factory Default.Phase Operation: Ph1= Phase 1 / Ph2=Phase 2Phase 1 (Ph1) flashes simultaneously with Ph1Phase 2 (Ph2) flashes simultaneously with Ph2OperationDefaultApply BLUE to BLACK wire:-Less than1 sec. for next pattern-Between 1-3 sec. for previous pattern-Between 3-5 sec. for Factory Default-More than 5 sec. for Last PatternINSTALLATION AND CONFIGURATION MANUALINSTALLATION AND CONFIGURATION MANUALMODEL#: UG-1200ABRAMS INSTALLATION AND CONFIGURATION MANUAL V.1.1WWW.ABRAMSMFG.COM | INFO@ABRAMSMFG.COM 01IMPORTANT! PLEASE READ THROUGH ALLPROVIDED INSTRUCTIONS AND ANY LISTEDWARNINGS IN REGARDS TO PRODUCT USE.Abrams Ultra Grill Lights844.9.ABRAMSinfo@AbramsMFG.comwww.AbramsMFG.comAbrams Ultra Grill Lights844.9.ABRAMSinfo@AbramsMFG.comwww.AbramsMFG.com

/ 2

Related manuals for Abrams UG-1200