Abrams UG-1800 Installation And Configuration Manual

Abrams UG-1800 Installation And Configuration Manual Manual pdf 1 page image

SpecificationsApply GREEN to Black wire: -Less than 1 sec. for Color SwitchColor Switch :P1 color1P2 color2P3 color3P4 color1& color2P5 color1& color3P6 color2& color3P7 color1& color2& color3E x : R B Ccolor1 : R(Red) color2 : B(Blue) color3 : C(White)120.6mm32.2mm14.3● LED: 4W*18 triple color● LEDS per head : 18● Voltage : 10-30VDC● Flash patterns : 24● Color : Color 1* Color 2*Color 3Proper installation of this product requires the installer to have a goodunderstanding of automotive electronics, systems and procedures.Failure to use specified installation parts or hardware will void theproduct warranty.For this product to operate at optimum efficiency, a good electricalconnection to chassis ground must be made.It is recommend that these instructions be stored in a safe place andreferred to when performing maintenance or reinstallation of thisproducts.Do not install and/or operate this safety product unless you have readand understand the safety information contained in this manual.This document provides all the necessary information to allow your product to be properly andsafely installed. Before beginning the installation and operation of your new product, theinstallation technician and operator must read this manual completely.INSTALLATION AND CONFIGURATION MANUALAbrams Ultra Grill Lights844.9.ABRAMSinfo@AbramsMFG.comwww.AbramsMFG.comAbrams Ultra Grill Lights844.9.ABRAMSinfo@AbramsMFG.comwww.AbramsMFG.comINSTALLATION AND CONFIGURATION MANUALMODEL#: UG-1800ABRAMS INSTALLATION AND CONFIGURATION MANUAL V.1.1WWW.ABRAMSMFG.COM | INFO@ABRAMSMFG.COM 01IMPORTANT! PLEASE READ THROUGH ALLPROVIDED INSTRUCTIONS AND ANY LISTEDWARNINGS IN REGARDS TO PRODUCT USE.

/ 2

Related manuals for Abrams UG-1800