Abrams UG-600 Installation And Configuration Manual

Abrams UG-600 Installation And Configuration Manual Manual pdf 1 page image

SpecificationsINSTALLATION AND CONFIGURATION MANUALOperationApply BLUE to BLACK wire:-Less than1 sec. for next pattern-Between 1-3 sec. for previous pattern-Between 3-5 sec. for Factory Default-More than 5 sec. for Last Pattern120.6mm32.2mm14.3● LED: 3W*6 Single Color● LEDs per head : 6● Voltage : 10-30VDC● Flash patterns : 29● Color : Amber, Blue, Red White and GreenProper installation of this product requires the installer to have a goodunderstanding of automotive electronics, systems and procedures.Failure to use specified installation parts or hardware will void theproduct warranty.For this product to operate at optimum efficiency, a good electricalconnection to chassis ground must be made.It is recommend that these instructions be stored in a safe place andreferred to when performing maintenance or reinstallation of thisproducts.Do not install and/or operate this safety product unless you have readand understand the safety information contained in this manual.This document provides all the necessary information to allow your product to be properly andsafely installed. Before beginning the installation and operation of your new product, theinstallation technician and operator must read this manual completely.P13 Quad 75FPM PH1 is Factory Default.Phase Operation: Ph1= Phase 1 / Ph2=Phase 2Phase 1 (Ph1) flashes simultaneously with Ph1Phase 2 (Ph2) flashes simultaneously with Ph2DefaultINSTALLATION AND CONFIGURATION MANUALMODEL#: UG-600ABRAMS INSTALLATION AND CONFIGURATION MANUAL V.1.1WWW.ABRAMSMFG.COM | INFO@ABRAMSMFG.COM 01IMPORTANT! PLEASE READ THROUGH ALLPROVIDED INSTRUCTIONS AND ANY LISTEDWARNINGS IN REGARDS TO PRODUCT USE.Abrams Ultra Grill Lights844.9.ABRAMSinfo@AbramsMFG.comwww.AbramsMFG.comAbrams Ultra Grill Lights844.9.ABRAMSinfo@AbramsMFG.comwww.AbramsMFG.com

/ 2

Related manuals for Abrams UG-600