Absolute Process Instruments Cecomp DPG2000B Series Instructions Manual

Absolute Process Instruments Cecomp DPG2000B Series Instructions Manual Manual pdf 1 page image

Cecomp® Intrinsically Safe Digital Pressure Gauges, with Min/Max Options DPG2000B D4 and M0, M1 SeriesO ±0.25% Test Gauge AccuracyO 316L Stainless Steel SensorO All Metal HousingAgency ApprovalFactory Mutual Approved Intrinsically Safe for Hazardous LocationsUSA & CanadaIS Class I, Division 1, Groups A, B, C, DT3C Ta = –40°C to 82°C; T4 Ta = –40°C to 66°CCL I Zone 0 AEx/Ex ia IICT3 Ta = –40°C to 82°C; T4 Ta = –40°C to 66°CRanges and ResolutionSee table below. Select range and default engineering unit.Units may be changed to any listed under the same sensor range.Resolution is fixed and limited to available display digits.Display3 readings per second nominal display update rate4 digit LCD, 0.5" H and 5 character 0.25" H alphanumericBL: Red LED backlight. Keypress activates backlighting for 1minute if ambient light is insufficient.AccuracyAccuracy includes linearity, hysteresis, repeatabilityStandard accuracy: ±0.25% of full scale ±1 least significant digitHA accuracy option: ±0.1% FS ±1 LSD, see ranges for availabilitySensor hysteresis: ±0.015% FS, included in accuracySensor repeatability: ±0.01% FS, included in accuracyAuto Shutoff5, 10 , 30 minutes, or on/off. User selectable 1 minute to 8 hrsMemory OptionsMin/max can be user configured to be individually enabled or dis-abled, readings saved or cleared at power offStd: Min/max enabledM0: Min/max turned off in user setupM1: Peak reading only gauge for tire pressureCalibrationNon-interactive zero, span, and linearity, ±10% of range Internalsetup/calibration buttons, internal lockout switch.Controls and FunctionsFront button turns gauge on or off, zeros gauge reference gauges,and cycles through min/max functions (if enabled)Internal buttons for engineering unit selection, auto shutoff time,min/max setup, calibrationInternal lockout switch to disable setup and calibrationBatteriesTwo 1.5 V AAA Panasonic LR03 alkaline cellsB: Approx. 1000 hoursBL: Approx. 150 to 1000 hours depending on backlight usageLow battery symbol on display when batteries need replacementWeight9 ounces (approx.), shipping wt. 1 pound (approx.)Housing Materials and Circuit Board ProtectionEpoxy powder coated aluminum case, rear cover, and bezel. Frontand rear rubber gaskets, polycarbonate label.Stainless steel stiffener plate to reinforce sensor area.Conformal coating on circuit boards for moisture resistance.Connection and Material1/4" NPT male fitting. All wetted parts are 316L stainless steel.Overpressure, Burst, Vacuum2 X pressure range for 3 psi to 2000 psi sensors5000 psig for ranges using 3000 psig sensor7500 psig for ranges using 5000 psig sensorOver-range display 112.5% FS: I – – – or I –.–.–.–Under-range display (non-vacuum sensors): –ErrVacuum service: 15 psia, ±15 psig, 15 psig, 30 psia,100 psig, 100 psia, 200 psig sensorsBurst: 4 X sensor pressure rating or 10,000 psi, whichever is lessEnvironmentalStorage temperature: –40 to 203°F (–40 to 95°C)Operating temperature: –4 to 185°F (–20 to 85°C)Compensated temperature: 32 to 158°F (0 to 70°C)Sensor Ranges and Engineering Units * -HA option not available Range codes are rounded off3 psig * Res 15 psig vac * Res 30 psia Res –15V100psig * Res 300 psig Res3PSIG .001 100KPAVAC .1 2KGCMA .001 100PSIVAC .1 300PSIG .16INHGG .001 0.1MPAVAC .0001 2ATMA .001 100PSICPD .1 610INHGG .185INH2OG .1 1BARVAC .001 30 psig Res 200INHGVAC .1 4800ZING 150ZING .01 1KGCMVAC .001 30PSIG .01 2770INH2OVAC 1 700FTH2O .1210GCMG .1 1ATMVAC .001 60INHGG .01 1600ZINVAC 1 2000KPAG 1150MMHGG .1 15 psig Res 850INH2OG 1 5200MMHGVAC 1 2MPAG .001150TORRG .1 15PSIG .01 480ZING .1 5200TORRVAC 1 20BARG .01200MBARG .1 30INHGG .01 2100GCMG 1 700KPAVAC 1 20KGCMG .01200CMH2OG .1 400INH2OG .1 1600MMHGG 1 0.7MPAVAC .001 20ATMG .012000MMH2OG 1 240ZING .1 1600TORRG 1 7BARVAC .01 500 psig Res7FTH2O .001 1000GCMG 1 2000MBARG 1 7KGCMVAC .01 500PSIG .120KPAG .01 760MMHGG .1 2100CMH2OG 1 7ATMVAC .01 1020INHGG 15 psig * Res 760TORRG .1 70FTH2O .01 100 psig Res 1150FTH2O 15PSIG .001 1000MBARG 1 200KPAG .1 100PSIG .1 3500KPAG 110INHGG .01 1000CMH2OG 1 0.2MPAG .0001 200INHGG .1 3.5MPAG .001140INH2OG .1 35FTH2O .01 2BARG .001 2770INH2OG 1 35BARG .0180ZING .1 100KPAG .1 2KGCMG .001 1600ZING 1 35KGCMG .01350GCMG .1 0.1MPAG .0001 2ATMG .001 7000GCMG 1 35ATMG .01260MMHGG .1 1BARG .001 60 psig Res 5200MMHGG 1 1000 psig Res260TORRG .1 1KGCMG .001 60PSIG .01 5200TORRG 1 1000PSIG 1350MBARG .1 1ATMG .001 120INHGG .1 7000MBARG 1 2040INHGG 1350CMH2OG .1 ±15 psig * Res 1660INH2OG 1 7000CMH2OG 1 2300FTH2O 13500MMH2OG 1 ±15PSIVAC .01 960ZING 1 230FTH2O .1 7000KPAG 112FTH2O .01 15PSICPD .01 4200GCMG 1 700KPAG .1 7MPAG .00135KPAG .01 ±30INHGVAC .01 3100MMHGG 1 0.7MPAG .0001 70BARG .0115 psia Res ±400INH2OVAC 1 3100TORRG 1 7BARG .001 70KGCMG .0115PSIA .01 ±240ZINVAC .1 4100MBARG 1 7KGCMG .001 70ATMG .0130INHGA .01 ±1000GCMVAC 1 4200CMH2OG 1 7ATMG .001 2000 psig Res400INH2OA .1 ±760MMHGVAC 1 140FTH2O .1 –15V200 psig * Res 2000PSIG 1240ZINA .1 ±760TORRVAC 1 400KPAG .1 200PSIVAC .1 4070INHGG 11000GCMA 1 ±1000MBARVAC 1 0.4MPAG .0001 200PSICPD .1 4600FTH2O 1760MMHGA .1 ±1000CMH2OVAC 1 4BARG .001 400INHGVAC .1 14MPAG .01760TORRA .1 ±100KPAVAC .1 4KGCMG .001 5500INH2OVAC 1 140BARG .11000MBARA 1 ±0.1MPAVAC .0001 4ATMG .001 3200ZINVAC 1 140KGCMG .11000CMH2OA 1 ±1BARVAC .001 100 psia Res 1400KPAVAC 1 140ATMG .1100KPAA .1 ±1KGCMVAC .001 100PSIA .1 1.4MPAVAC .001 3000 psig Res0.1MPAA .0001 ±1ATMVAC .001 200INHGA .1 14BARVAC .01 3000PSIG 11BARA .001 30 psia Res 2770INH2OA 1 14KGCMVAC .01 6100INHGG 11KGCMA .001 30PSIA .01 1600ZINA 1 14ATMVAC .01 6900FTH2O 11ATMA .001 60INHGA .01 7000GCMA 1 200 psig Res 20MPAG .0115 psig vac * Res 850INH2OA 1 5200MMHGA 1 200PSIG .1 200BARG .115PSIVAC .01 480ZINA .1 5200TORRA 1 400INHGG .1 200KGCMG .130INHGVAC .01 2100GCMA 1 7000MBARA 1 5500INH2OG 1 200ATMG .1400INH2OVAC .1 1600MMHGA 1 7000CMH2OA 1 3200ZING 1 5000 psig Res240ZINVAC .1 1600TORRA 1 700KPAA .1 480FTH2O .1 5000PSIG 11000GCMVAC 1 2000MBARA 1 0.7MPAA .0001 1400KPAG 1 35MPAG .01760MMHGVAC .1 2100CMH2OA 1 7BARA .001 1.4MPAG .001 350BARG .1760TORRVAC .1 200KPAA .1 7KGCMA .001 14BARG .01 350KGCMG .11000MBARVAC 1 0.2MPAA .0001 7ATMA .001 14KGCMG .01 340ATMG .11000CMH2OVAC 1 2BARA .001 14ATMG .01How to Specify Display MemoryDPG2000B range -D4-time-options - Min/maxDPG2000BBL range -D4-time options backlit Min/maxDPG2000B range -D4-M0-time-options - Min/max offDPG2000BBL range -D4-M0-time-options backlit Min/max offDPG2000B range -D4-M1-time-options - Peak readDPG2000BBL range -D4-M1-time-options backlit Peak readG = gauge reference pressureCPD = compound; inHg vacuum, psi pressureVAC = gauge reference vacuumA = absolute referencepsi = PSIinHg = INHGoz/in2 = ZINinH2O = INH2OftH2O = FTH2OmmHg = MMHGtorr = TORRmmH2O = MMH2Okg/cm2 = KGCMg/cm2 = GCMkPa = KPAMPa = MPAmbar = MBARbar = BARcmH2O = CMH2Oatm = ATMRange—See table at left. Select a range code for default units.Please specify if vacuum gauge requires a minus sign.Time—auto shutoff time5 5 minutes. Default if not specified.10 10 minutes30 30 minutesON No auto shutoff. On/off via front button.xH Custom shutoff time where x = up to 8 hoursOptions—add to end of model number. See price list for details.HA High accuracy, ±0.1% FS ±1 LSD. See range table.PM Panel mount, 4.1" x 4.1"TP Top port, gauge port on top of caseCD Calibration data; 5 test points and dateNC NIST traceability documentation, 5 points and dateH H H H H HH H H H HH H H H H HH H H H HH H H H H HH H H H HH H H H H HH H H H HH H H H H HMade in USAQuick Linkcecomp.com/isAccessories—order separatelyCON14SSQuick connector to install or remove gauge with-out tools. 304 stainless steel, urethane seal.SCR14SSFilter screen fitting keeps debris out of gaugesensor. For food vacuum packaging applications.303SS body, 100 micron 304SS screen.RBHigh visibility orange rubber boot protects gaugefor portable applications. Not available with NEMA4X models.TPTop gauge port. Primarily used with tire pressureapplications. Not available with NEMA 4X models.© 08-18cecomp.com1220 American Way Libertyville, IL 60048800-942-0315CECOMP Div. of ABSOLUTE PROCESS INSTRUMENTS

/ 4

Related manuals for Absolute Process Instruments Cecomp DPG2000B D4 Series