Contents - Declaration of conformity
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Quickstart guide
- Safety information
- Power supply
- Wireless operation
- Device overview
- International key assignment
- Device rear (mounting plate)
- Introduction
- Mounting/Installation
- Fixing the mounting plate to the wall
- Connecting the components
- Commissioning
- For a system that is already installed
- Configuration
- Menu control elements
- Login screen
- Main menu
- INFO
- Communication
- Status
- Components
- Detectors
- Wireless control panel
- External Sirens
- Info module/indoor siren
- WUM (Wireless Universal Module)
- Door locks
- RF repeater
- Outputs
- Wired Outputs
- Partitions
- Configure partitions
- System
- Installer details
- User access
- User reset
- Confirmation
- Hardware
- Security settings
- Backup/restore
- Panel upgrade
- Email setup
- VoIP dialler setup
- ARC reporting
- ARC Reporting, Phone Book
- ARC Reporting, Account Numbers
- ARC Reporting, Fast Fmt Channels (for "Fast Format" protocol only)
- ARC Reporting, CID/SIA Triggers (for all protocols EXCEPT "Fast Format")
- ARC Reporting, More
- Nursing emergency call
- Social Care, Phone Book
- Social Care, Account Numbers
- Voice dialler
- Speech Dialler, Triggers
- Speech Dialler, Destinations
- SMS, Triggers
- SMS, Destinations
- SMS, Destinations, Message
- SMS, Destinations, Message, Telephone Recipients
- SMS, Messages
- SMS, PSTN SMS
- Email
- Email, Triggers
- Email, Destinations
- Email, Messages
- Communication options
- Contacts
- Test
- Virtual keypad
- Appendix
- Compatible equipment
- Default values/factory defaults
- User menu
- Repairs and maintenance
- S/W upgrade
- ARC/ESCC reporting
- CID/SIA Events
- Email error messages
- TCP/IP error messages
- VoIP error messages
- Log book entries
- User numbers
- Troubleshooting
- Carry out a GSM manual test call, prepaid
- Trace, recording communication sequences
- Time zones
- GSM network notification centre
- Email notification/email setup
- Index
- Linker Kreuthweg
|
Configuration58Door locksName/function ExplanationNumber The number comprises the component type (door lock) and a consecutive number.Name Unique name of the door locks (e.g. Secvest Key or additional door lock).Partitions Number of the partition to which the door lock is assigned.Adding door locks (alarm panel only)1. Select Door Locks.2. Select Add/Del Door Lock.3. Select the corresponding door lock.4. Trigger the tamper contact of the door lock or inserta battery.NoteWhen the door lock has been taught in, thewireless alarm panel beeps twice to confirm.A message appears on the display to confirm thatthe door lock was added, and the value for thereceived signal strength is shown.5. Exit the entry with Back.NoteIf a door lock has been taught in the symbolappears next to the door lock number on thealarm panel display.6. Exit this display with Back.Delete All1. Select Delete All.2. Confirm the selection with Next.3. Confirm the security prompt with Yes to deletethe door locks or Back if you are not sure.
|
