Abus TVVR33004 User Manual

Also see for TVVR33004: User guide Quick guide

Abus TVVR33004 User Manual Manual pdf 38 page image

Camera103Video TamperingSelect the camera channel to be processed under"Camera".Tick the "Enable Video Tampering Detection" box anddefine any other optional parameters under "Settings".The sabotage alarm is activated if there is any tamperingwith the camera lens (sharpness, dimming).Arming ScheduleSelect the Arming Schedule tab.Here you set the times at which the reactions set in theLinkage Action tab are triggered.1. Select the day and enter the schedule.NoteUp to eight time slots, between 00:00 and 00:00,can be defined in each case, but the individualtime slots must not overlap.2. Under Copy, select whether or not the setting shouldbe applied to every day of the week and the holidaysettings.3. Confirm the settings by clicking on Apply and exitthe menu by clicking on OK.Linkage MethodSelect the Linkage Action tab.Here you can configure the response of the recorderduring an event (e.g. motion detected) by ticking thecorresponding box.Parameter NotificationsFull Screen Monitoring The camera is displayed infull screen in live view.Audible Warning The device emits arepeated signal tone.Notify SurveillanceCentreThe CMS sends out awarning message.Send Email An email is sent to aspecified email address.See page 92.Trigger Alarm Output The alarm output istriggered in the event of analarm.Confirm the settings by clicking on Apply and exit themenu by clicking on OK.